PartsTable
Technical Data Sheet
Download PDF

5310PL1807233 — NUT,PLAIN,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5310PL1807233: NUT,PLAIN,PLATE.

The NUT,PLAIN,PLATE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 NUT, nut_style: PLATE (FLOATING), nut_height: 0.455 INCHES MAXIMUM IN, nut_length: 1.042 INCHES MAXIMUM IN, plate_width: 0.650 INCHES MAXIMUM IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-485-9599, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310PL1807233
NSN: 5310-01-485-9599
FSC: 5310 — Nuts and Washers
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialNICKEL ALLOY 718 NUT
nut_stylePLATE (FLOATING)
nut_height0.455 INCHES MAXIMUM IN
nut_length1.042 INCHES MAXIMUM IN
plate_width0.650 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
plate_thickness0.060 INCHES NOMINAL IN
special_featuresBASEPLATE FINNISH CODE P AT THE END OF PART NUMBER = PRIMER ON BOTTOM SURFACE OF BASEPLATE, EPOXY PRIMER PER MIL-P-85582
thread_directionRIGHT-HAND
nominal_thread_size0.250 INCHES IN
thread_quantity_per_inch28
NSN5310-01-485-9599
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310PL1807233 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.060 INCHES NOMINAL IN
•
NUT LENGTH: 1.042 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
PLATE WIDTH: 0.650 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.455 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.060 INCHES NOMINAL IN
NUT LENGTH1.042 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
PLATE WIDTH0.650 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.455 INCHES MAXIMUM IN
SPECIAL FEATURESBASEPLATE FINNISH CODE P AT THE END OF PART NUMBER = PRIMER ON BOTTOM SURFACE OF BASEPLATE, EPOXY PRIMER PER MIL-P-85582
NUT STYLEPLATE (FLOATING)
THREAD CLASS3B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
C20812-4-1PReference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5310PL1807233?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310PL1807233?
5310PL1807233 is a NUT,PLAIN,PLATE.
What parts can replace 5310PL1807233?
There is 1 known substitute for 5310PL1807233: C20812-4-1P. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310PL1807233?
5310PL1807233 is cataloged in the U.S. Government catalog under NSN 5310-01-485-9599. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310PL1807233

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.