PartsTable
Technical Data Sheet
Download PDF

5310PL1075273 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5310PL1075273: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1095 OVERALL, hole_diameter: 0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN, heat_treatment: ANNEALED, overall_height: 0.030 INCHES NOMINAL IN, surface_finish: 63.0 MICROINCHES ALL SURFACES, outside_diameter: 0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-044-2367, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310PL1075273
NSN: 5310-00-044-2367
FSC: 5310 — Nuts and Washers
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 1095 OVERALL
hole_diameter0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
heat_treatmentANNEALED
overall_height0.030 INCHES NOMINAL IN
surface_finish63.0 MICROINCHES ALL SURFACES
outside_diameter0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
material_thickness0.006 INCHES NOMINAL IN
material_document_and_classificationMIL-S-7947 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-044-2367
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310PL1075273 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES ALL SURFACES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HEAT TREATMENT: ANNEALED
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7947 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.006 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES ALL SURFACES
OVERALL HEIGHT0.030 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HEAT TREATMENTANNEALED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7947 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
MATERIAL THICKNESS0.006 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 1095 OVERALL
HOLE DIAMETER0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 6
S8809D16CReference document
Same NSN cross-reference
Reference document — Secondary reference
3050-0161Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
R2Reference document
Same NSN cross-reference
Reference document — Secondary reference
SRSS8809D16CSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
W0367-006Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2079-72-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5310PL1075273?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310PL1075273?
5310PL1075273 is a WASHER,SPRING TENSION.
What parts can replace 5310PL1075273?
There are 6 known substitutes for 5310PL1075273: S8809D16C, 3050-0161, R2 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310PL1075273?
5310PL1075273 is cataloged in the U.S. Government catalog under NSN 5310-00-044-2367. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310PL1075273

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.