PartsTable
Technical Data Sheet
Download PDF

5310PL0983477 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5310PL0983477: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 270 OR COPPER ALLOY 268 OVERALL, thickness: 0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN, hole_diameter: 0.225 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN, overall_diameter: 0.495 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, surface_treatment: TIN OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-177-1156, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310PL0983477
NSN: 5310-00-177-1156
FSC: 5310 — Nuts and Washers
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialCOPPER ALLOY 270 OR COPPER ALLOY 268 OVERALL
thickness0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
hole_diameter0.225 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
overall_diameter0.495 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
surface_treatmentTIN OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-W-321 1/2 HARD FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626 1/2 HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-T-10727 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-177-1156
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310PL0983477 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-T-10727 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.495 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-321 1/2 HARD FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626 1/2 HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: TIN OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: COPPER ALLOY 270 OR COPPER ALLOY 268 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-T-10727 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.495 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-321 1/2 HARD FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626 1/2 HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTTIN OVERALL
PERIPHERAL SHAPE STYLEROUND
END ITEM IDENTIFICATIONW/S: ENGINE, AIRCRAFT, F110-GE-100/129 (F-16C/D); AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); GUIDED MISSILE LAUNCHING SYSTEM, MK 26 (GMLS); SUPPORT EQUIPMENT, B-1 AIRCRAFT; AIRCRAFT, C-2A (REPROCURED); TRAINER, B-1B AIRCRAFT; CLOSE IN WEAPON SYSTEM (CIWS-PHALANX); TACTICAL AIR OPNS MODULE (AN/TYQ-(23)); DEEP SUBMERGENCE SYSTEMS PROGRAMS (DSSP) A
MATERIALCOPPER ALLOY 270 OR COPPER ALLOY 268 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.225 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 4
817262Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AN961-416TReference document
Same NSN cross-reference
Reference document — Secondary reference
NASM961-416TReference document
Same NSN cross-reference
Reference document — Secondary reference
10496198Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 5310PL0983477?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310PL0983477?
5310PL0983477 is a WASHER,FLAT.
What parts can replace 5310PL0983477?
There are 4 known substitutes for 5310PL0983477: 817262, AN961-416T, NASM961-416T and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310PL0983477?
5310PL0983477 is cataloged in the U.S. Government catalog under NSN 5310-00-177-1156. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310PL0983477

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.