PartsTable
Technical Data Sheet
Download PDF

5310PL0921547 — WASHER,FINISHING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5310PL0921547: WASHER,FINISHING.

The WASHER,FINISHING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1055 OR STEEL COMP 1060 OVERALL, recess_angle: 100.0 DEGREES NOMINAL, hole_diameter: 0.196 INCHES NOMINAL IN, overall_height: 0.100 INCHES NOMINAL IN, hardness_rating: 38.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM, outside_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-209-2354, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310PL0921547
NSN: 5310-00-209-2354
FSC: 5310 — Nuts and Washers
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 1055 OR STEEL COMP 1060 OVERALL
recess_angle100.0 DEGREES NOMINAL
hole_diameter0.196 INCHES NOMINAL IN
overall_height0.100 INCHES NOMINAL IN
hardness_rating38.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM
outside_diameter0.750 INCHES NOMINAL IN
style_designatorFINISHING
surface_treatmentCADMIUM OVERALL
material_thickness0.017 INCHES NOMINAL IN
NSN5310-00-209-2354
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310PL0921547 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: FINISHING
•
OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.017 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL COMP 1055 OR STEEL COMP 1060 OVERALL
•
HOLE DIAMETER: 0.196 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.100 INCHES NOMINAL IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORFINISHING
OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.017 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 1055 OR STEEL COMP 1060 OVERALL
HOLE DIAMETER0.196 INCHES NOMINAL IN
RECESS ANGLE100.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES 2
A20832-017-24AReference document
Same NSN cross-reference
Reference document — Secondary reference
NAS1169-102Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5310PL0921547?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310PL0921547?
5310PL0921547 is a WASHER,FINISHING.
What parts can replace 5310PL0921547?
There are 2 known substitutes for 5310PL0921547: A20832-017-24A, NAS1169-102. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310PL0921547?
5310PL0921547 is cataloged in the U.S. Government catalog under NSN 5310-00-209-2354. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310PL0921547

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.