PartsTable
Technical Data Sheet
Download PDF

5310PL0914273 — NUT,PLAIN,SPLINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5310PL0914273: NUT,PLAIN,SPLINE.

The NUT,PLAIN,SPLINE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: SPLINE, nut_height: 0.250 INCHES NOMINAL IN, nut_diameter: 0.437 INCHES NOMINAL IN, pilot_length: 0.135 INCHES NOMINAL IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-836-8768, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310PL0914273
NSN: 5310-00-836-8768
FSC: 5310 — Nuts and Washers
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleSPLINE
nut_height0.250 INCHES NOMINAL IN
nut_diameter0.437 INCHES NOMINAL IN
pilot_length0.135 INCHES NOMINAL IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.312 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.250 INCHES IN
thread_quantity_per_inch20
NSN5310-00-836-8768
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310PL0914273 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT DIAMETER: 0.437 INCHES NOMINAL IN
•
PILOT DIAMETER: 0.312 INCHES NOMINAL IN
•
PILOT LENGTH: 0.135 INCHES NOMINAL IN
•
NUT HEIGHT: 0.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT DIAMETER0.437 INCHES NOMINAL IN
PILOT DIAMETER0.312 INCHES NOMINAL IN
PILOT LENGTH0.135 INCHES NOMINAL IN
NUT HEIGHT0.250 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLESPLINE
THREAD CLASS3B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
R10245P5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5310PL0914273?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310PL0914273?
5310PL0914273 is a NUT,PLAIN,SPLINE.
What parts can replace 5310PL0914273?
There is 1 known substitute for 5310PL0914273: R10245P5. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310PL0914273?
5310PL0914273 is cataloged in the U.S. Government catalog under NSN 5310-00-836-8768. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310PL0914273