PartsTable
Technical Data Sheet
Download PDF

5310PL0792377 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5310PL0792377: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include thickness: 0.051 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN, hole_diameter: 0.401 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN, overall_diameter: 0.868 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-280-5796, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310PL0792377
NSN: 5310-01-280-5796
FSC: 5310 — Nuts and Washers
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
thickness0.051 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
hole_diameter0.401 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN
overall_diameter0.868 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationMRAP-RG-33 ARMORED UTILITY VEHICLE (AUV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationASTM A568 ASSN STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-280-5796
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310PL0792377 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.868 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A568 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.868 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A568 ASSN STD ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
PERIPHERAL SHAPE STYLEROUND
END ITEM IDENTIFICATIONMRAP-RG-33 ARMORED UTILITY VEHICLE (AUV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.401 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
920052Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS27183-57Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5310PL0792377?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310PL0792377?
5310PL0792377 is a WASHER,FLAT.
What parts can replace 5310PL0792377?
There are 2 known substitutes for 5310PL0792377: 920052, MS27183-57. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310PL0792377?
5310PL0792377 is cataloged in the U.S. Government catalog under NSN 5310-01-280-5796. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310PL0792377

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.