PartsTable
Technical Data Sheet
Download PDF

5310PL0744875 — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5310PL0744875: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, recess_angle: 90.0 DEGREES NOMINAL, hole_diameter: 0.251 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN, hardness_rating: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM, recess_diameter: 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN, outside_diameter: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-057-5689, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310PL0744875
NSN: 5310-01-057-5689
FSC: 5310 — Nuts and Washers
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
recess_angle90.0 DEGREES NOMINAL
hole_diameter0.251 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
hardness_rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
recess_diameter0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
outside_diameter0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
style_designatorRECESSED
surface_treatmentCADMIUM OVERALL
material_thickness0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-658 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-057-5689
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310PL0744875 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: RECESSED
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-658 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
RECESS DIAMETER: 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORRECESSED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-658 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
MATERIAL THICKNESS0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
RECESS DIAMETER0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 4130 OVERALL
HOLE DIAMETER0.251 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
MS21206-C4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5310PL0744875?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310PL0744875?
5310PL0744875 is a WASHER,RECESSED.
What parts can replace 5310PL0744875?
There is 1 known substitute for 5310PL0744875: MS21206-C4. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310PL0744875?
5310PL0744875 is cataloged in the U.S. Government catalog under NSN 5310-01-057-5689. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310PL0744875

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.