PartsTable
Technical Data Sheet
Download PDF

5310PL0739885 — WASHER,FINISHING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5310PL0739885: WASHER,FINISHING.

The WASHER,FINISHING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, recess_angle: 100.0 DEGREES NOMINAL, hole_diameter: 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, overall_height: 0.160 INCHES NOMINAL IN, recess_diameter: 0.635 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN, outside_diameter: 0.933 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-026-4385, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310PL0739885
NSN: 5310-01-026-4385
FSC: 5310 — Nuts and Washers
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
recess_angle100.0 DEGREES NOMINAL
hole_diameter0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
overall_height0.160 INCHES NOMINAL IN
recess_diameter0.635 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
outside_diameter0.933 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
style_designatorFINISHING
surface_treatmentANODIZE OVERALL
material_thickness0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/5,TEMPER T3 OR TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-026-4385
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310PL0739885 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: FINISHING
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5,TEMPER T3 OR TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.933 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
•
RECESS DIAMETER: 0.635 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.160 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORFINISHING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,TEMPER T3 OR TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.933 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
MATERIAL THICKNESS0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
RECESS DIAMETER0.635 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY 2024 OVERALL
HOLE DIAMETER0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
NAS1169-DD516Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5310PL0739885?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310PL0739885?
5310PL0739885 is a WASHER,FINISHING.
What parts can replace 5310PL0739885?
There is 1 known substitute for 5310PL0739885: NAS1169-DD516. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310PL0739885?
5310PL0739885 is cataloged in the U.S. Government catalog under NSN 5310-01-026-4385. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310PL0739885

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.