PartsTable
Technical Data Sheet
Download PDF

5310PL0724734 — NUT SPACER,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5310PL0724734: NUT SPACER,PLATE.

The NUT SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052 OVERALL, nut_style: PLATE NUT SPACER, nut_length: 1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM IN, plate_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, plate_thickness: 0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN, surface_treatment: ANODIZE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-550-2123, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310PL0724734
NSN: 5310-00-550-2123
FSC: 5310 — Nuts and Washers
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialALUMINUM ALLOY 5052 OVERALL
nut_stylePLATE NUT SPACER
nut_length1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM IN
plate_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
plate_thickness0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
thru-hole_diameter0.322 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
mounting_hole_diameter0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
nut_mounting_provisionCOUNTERSUNK HOLES
mounting_provision_locationNUT PROJECTION SIDE
specification/standard_data80205-NAS463 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
mounting_hole_arrangement_style2 HOLES
NSN5310-00-550-2123
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310PL0724734 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
NUT LENGTH: 1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
PLATE WIDTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MOUNTING HOLE COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/8,ALLOY 5052,H32 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/8,H34 FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-250/8,H36 FED SPEC 3RD MATERIAL RESPONSE OVERALL
•
MOUNTING HOLE DIAMETER: 0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
NUT LENGTH1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
PLATE WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MOUNTING HOLE COUNTERSINK ANGLE100.0 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/8,ALLOY 5052,H32 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/8,H34 FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-250/8,H36 FED SPEC 3RD MATERIAL RESPONSE OVERALL
MOUNTING HOLE DIAMETER0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
MOUNTING PROVISION LOCATIONNUT PROJECTION SIDE
SPECIFICATION/STANDARD DATA80205-NAS463 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SUBSTITUTES & CROSS-REFERENCES 2
NAS463XKD416Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10121487Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 5310PL0724734?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310PL0724734?
5310PL0724734 is a NUT SPACER,PLATE.
What parts can replace 5310PL0724734?
There are 2 known substitutes for 5310PL0724734: NAS463XKD416, 10121487. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310PL0724734?
5310PL0724734 is cataloged in the U.S. Government catalog under NSN 5310-00-550-2123. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310PL0724734

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.