PartsTable
Technical Data Sheet
Download PDF

5310PL0723149 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5310PL0723149: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, nut_style: SLEEVE, nut_length: 0.511 INCHES MINIMUM AND 0.551 INCHES MAXIMUM IN, nut_diameter: 0.560 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-369-5663, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310PL0723149
NSN: 5310-00-369-5663
FSC: 5310 — Nuts and Washers
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
nut_styleSLEEVE
nut_length0.511 INCHES MINIMUM AND 0.551 INCHES MAXIMUM IN
nut_diameter0.560 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
flange_thickness0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM NUT
nominal_thread_size0.438 INCHES IN
cross-sectional_shapeHEXAGONAL FLANGE
drilled_hole_diameter0.050 INCHES NOMINAL IN
NSN5310-00-369-5663
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310PL0723149 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 0.616 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
•
NUT LENGTH: 0.511 INCHES MINIMUM AND 0.551 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
HOLE CONFIGURATION STYLE: CONFIGURATION B
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS0.616 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
NUT LENGTH0.511 INCHES MINIMUM AND 0.551 INCHES MAXIMUM IN
FLANGE THICKNESS0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
HOLE CONFIGURATION STYLECONFIGURATION B
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.438 INCHES IN
NUT DIAMETER0.560 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEHEXAGONAL FLANGE
SUBSTITUTES & CROSS-REFERENCES 1
4018063Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5310PL0723149?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310PL0723149?
5310PL0723149 is a NUT,SLEEVE.
What parts can replace 5310PL0723149?
There is 1 known substitute for 5310PL0723149: 4018063. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310PL0723149?
5310PL0723149 is cataloged in the U.S. Government catalog under NSN 5310-00-369-5663. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310PL0723149

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.