PartsTable
Technical Data Sheet
Download PDF

5310PL0653154 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5310PL0653154: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OR STEEL COMP 1020 OVERALL, hole_diameter: 0.410 INCHES NOMINAL IN, outside_diameter: 1.560 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, material_thickness: 0.090 INCHES NOMINAL IN, end_item_identification: MRAP - COMMON NSN - USED ON MRAP NO PERMANENT WSDC IDENTIFIED AND 20 OTHER WEAPON SYSTEMS. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-100-2067, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310PL0653154
NSN: 5310-01-100-2067
FSC: 5310 — Nuts and Washers
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1020 OVERALL
hole_diameter0.410 INCHES NOMINAL IN
outside_diameter1.560 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.090 INCHES NOMINAL IN
end_item_identificationMRAP - COMMON NSN - USED ON MRAP NO PERMANENT WSDC IDENTIFIED AND 20 OTHER WEAPON SYSTEMS
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-100-2067
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310PL0653154 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J403,TEMPER 4 ASSN STD 1ST MATERIAL RESPONSE OR SAE J403,TEMPER 5 ASSN STD 1ST MATERIAL RESPONSE OR SAE J403,TEMPER 4 ASSN STD 2ND MATERIAL RESPONSE OR SAE J403,TEMPER 5 ASSN STD 2ND MATERIAL RESPONSE OR QQ-S-698,TEMPER 4 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-698,TEMPER 5 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.560 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.090 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1020 OVERALL
•
HOLE DIAMETER: 0.410 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J403,TEMPER 4 ASSN STD 1ST MATERIAL RESPONSE OR SAE J403,TEMPER 5 ASSN STD 1ST MATERIAL RESPONSE OR SAE J403,TEMPER 4 ASSN STD 2ND MATERIAL RESPONSE OR SAE J403,TEMPER 5 ASSN STD 2ND MATERIAL RESPONSE OR QQ-S-698,TEMPER 4 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-698,TEMPER 5 FED SPEC 2ND MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.560 INCHES NOMINAL IN
MATERIAL THICKNESS0.090 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
END ITEM IDENTIFICATIONMRAP - COMMON NSN - USED ON MRAP NO PERMANENT WSDC IDENTIFIED AND 20 OTHER WEAPON SYSTEMS
MATERIALSTEEL COMP 1010 OR STEEL COMP 1020 OVERALL
HOLE DIAMETER0.410 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
11668979Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5310PL0653154?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310PL0653154?
5310PL0653154 is a WASHER,LOCK.
What parts can replace 5310PL0653154?
There is 1 known substitute for 5310PL0653154: 11668979. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310PL0653154?
5310PL0653154 is cataloged in the U.S. Government catalog under NSN 5310-01-100-2067. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310PL0653154

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.