PartsTable
Technical Data Sheet
Download PDF

5310PL0211511 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5310PL0211511: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321 OVERALL, thickness: 0.062 INCHES NOMINAL IN, hole_diameter: 0.333 INCHES MINIMUM AND 0.343 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES BOTTOM, overall_diameter: 0.625 INCHES NOMINAL IN, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-945-0528, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310PL0211511
NSN: 5310-00-945-0528
FSC: 5310 — Nuts and Washers
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 321 OVERALL
thickness0.062 INCHES NOMINAL IN
hole_diameter0.333 INCHES MINIMUM AND 0.343 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES BOTTOM
overall_diameter0.625 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-945-0528
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310PL0211511 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES BOTTOM
•
OVERALL DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 321 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES BOTTOM
SURFACE FINISH63.0 MICROINCHES TOP
OVERALL DIAMETER0.625 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTPASSIVATE OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 321 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.333 INCHES MINIMUM AND 0.343 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
236-1170P15Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
301250Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS9321-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
9682013246Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5310009450528Reference document
Same NSN cross-reference
Reference document — Informative reference only
N400P42Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 5310PL0211511?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310PL0211511?
5310PL0211511 is a WASHER,FLAT.
What parts can replace 5310PL0211511?
There are 7 known substitutes for 5310PL0211511: 236-1170P15, 301250, MS9321-11 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310PL0211511?
5310PL0211511 is cataloged in the U.S. Government catalog under NSN 5310-00-945-0528. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310PL0211511

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.