PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5310008175349

5310008175349 — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.894 INCHES MINIMUM AND 0.927 INCHES MAXIMUM IN, outside_diameter: 1.090 INCHES NOMINAL IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: ZINC OVERALL, material_thickness: 0.020 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-817-5349, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310008175349
NSN: 5310-00-817-5349
FSC: 5310
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.894 INCHES MINIMUM AND 0.927 INCHES MAXIMUM IN
outside_diameter1.090 INCHES NOMINAL IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentZINC OVERALL
material_thickness0.020 INCHES NOMINAL IN
NSN5310-00-817-5349
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310008175349 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ZINC OVERALL
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 1.090 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.894 INCHES MINIMUM AND 0.927 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTZINC OVERALL
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER1.090 INCHES NOMINAL IN
HOLE DIAMETER0.894 INCHES MINIMUM AND 0.927 INCHES MAXIMUM IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
193 7283Interchangeable
interchangeable cross-reference
interchangeable
123-404Interchangeable
interchangeable cross-reference
interchangeable
128-400Interchangeable
interchangeable cross-reference
interchangeable
7688700Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5310008175349?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310008175349?
5310008175349 is a WASHER,LOCK.
What parts can replace 5310008175349?
There are 4 known substitutes for 5310008175349: 193 7283, 123-404, 128-400 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310008175349?
5310008175349 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-817-5349. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310008175349

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026