The Nut,plain,blind Rivet, cataloged under National Stock Number 5310-01-669-2558, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-669-2558 |
| Item Name | Nut,plain,blind Rivet |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Head Height | 0.124 INCHES MAXIMUM IN |
| Nut Length | 1.641 INCHES MINIMUM AND 1.671 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Series | UNF |
| Head Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Material Document and Classification | ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Shank End Type | CLOSED |
| Head Style | FLAT COUNTERSUNK KEYED |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.375 INCHES IN |
| Nut Diameter | 0.486 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Nut Style | BLIND RIVET W/SMOOTH ROUND SHANK |
| Thread Class | 3B |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 1010 OR STEEL COMP 1008 OR STEEL COMP 1108 OR STEEL COMP 1110 OVERALL |
| Key Projection Length | 0.110 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN |
| Head Diameter | 0.597 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1330SEKB466 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-01-669-2558 is a Nut,plain,blind Rivet, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-669-2558: Head Height: 0.124 INCHES MAXIMUM IN; Nut Length: 1.641 INCHES MINIMUM AND 1.671 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Series: UNF. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.