The Nut,sheet Spring, cataloged under National Stock Number 5310-01-612-8818, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-612-8818 |
| Item Name | Nut,sheet Spring |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Nut Width | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Hole Thread Quantity Per Inch | 18 |
| Nut Length | 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | IAW DRAWING 12469117,MAGNI ORGANIC COAT 565 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Distance From Mounting Hole Center to Base | 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| Mounting Hole Arrangement Style | 1 HOLE |
| Gripping Prong Length | 0.050 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| Mounting Hole Diameter | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN |
| Material Thickness | 0.031 INCHES NOMINAL IN |
| Gripping Prong Quantity | 2 |
| Panel Thickness | 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN |
| Mating Member Diameter Accommodated | 0.164 INCHES NOMINAL IN |
| Surface Treatment | ZINC OVERALL |
| Nut Style | SHEET SPRING |
| Hole Nominal Thread Diameter | 0.164 INCHES IN |
| Material | STEEL OVERALL |
| Nut Mounting Provision | GRIPPING PRONGS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 12480521 | 7/2 Vendor item drawing reference U S Army Tank Automotive Command Amsta-Im-Mm |
| C9812-8Z | 3/9 Design control — primary reference Tinnerman Palnut Engineered Products, Inc. |
NSN 5310-01-612-8818 is a Nut,sheet Spring, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-612-8818: Nut Width: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN; Hole Thread Quantity Per Inch: 18; Nut Length: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN; Surface Treatment Document and Classification: IAW DRAWING 12469117,MAGNI ORGANIC COAT 565 MFR REF SINGLE TREATMENT RESPONSE OVERALL. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.