The Washer,recessed, cataloged under National Stock Number 5310-01-543-2038, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-543-2038 |
| Item Name | Washer,recessed |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Surface Finish | 125.0 MICROINCHES ALL SURFACES |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OR CDA000 TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM |
| Style Designator | RECESSED |
| Material Document and Classification | AMS 5696 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5597 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Outside Diameter | 1.615 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN |
| Material Thickness | 0.137 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN |
| Recess Diameter | 1.182 INCHES MINIMUM AND 1.192 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OR CADMIUM OVERALL |
| Material | NICKEL ALLOY 718 OVERALL |
| Hole Diameter | 0.914 INCHES MINIMUM AND 0.918 INCHES MAXIMUM IN |
| Recess Angle | 45.0 DEGREES NOMINAL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS14183L-C14 | 5/9 Secondary reference U.S. Government activity |
| MS14183L-C14 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-01-543-2038 is a Washer,recessed, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-543-2038: Surface Finish: 125.0 MICROINCHES ALL SURFACES; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OR CDA000 TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM; Style Designator: RECESSED. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.