The Washer,flat, cataloged under National Stock Number 5310-01-518-4276, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. The manufacturer of record is International Organization for Standardization (iso). Government technical data includes 7 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-518-4276 |
| Primary Part Number | ISO7091-17.5-100HV-A3L |
| Item Name | Washer,flat |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Manufacturer | International Organization for Standardization (iso) |
| Status | ACTIVE |
| Overall Diameter | 32.4 MILLIMETERS MINIMUM AND 34.0 MILLIMETERS MAXIMUM MM |
| Cross-Sectional Shape Style | RECTANGULAR |
| Peripheral Shape Style | ROUND |
| Material | STEEL OVERALL |
| Center Hole Shape Style | ROUND |
| Hole Diameter | 20.000 MILLIMETERS MINIMUM AND 20.430 MILLIMETERS MAXIMUM MM |
| Thickness | 3.000 MILLIMETERS NOMINAL MM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| ISO7091-17.5-100HV-A3L | International Organization for Standardization (iso) (CHE) |
| Reference | Meaning |
|---|---|
| 10625479 | 5/1 Secondary reference General Dynamics Land Systems Canadacorp |
| DIN126-17.5-100HV-A3L | 5/9 Secondary reference Din Deutsches Institut Fur Normung Ev |
NSN 5310-01-518-4276 is a Washer,flat, manufactured by International Organization for Standardization (iso), classified under FSC 5310, Nuts and Washers. Status: active.
NSN 5310-01-518-4276 has 1 manufacturer part number on file: ISO7091-17.5-100HV-A3L (International Organization for Standardization (iso)).
Key specifications for ISO7091-17.5-100HV-A3L: Overall Diameter: 32.4 MILLIMETERS MINIMUM AND 34.0 MILLIMETERS MAXIMUM MM; Cross-Sectional Shape Style: RECTANGULAR; Peripheral Shape Style: ROUND; End Item Identification: STRYKER, FOV. 7 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.