The Nut,plain,hexagon, cataloged under National Stock Number 5310-01-450-3675, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-450-3675 |
| Item Name | Nut,plain,hexagon |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Width Across Flats | 1.605 INCHES MINIMUM AND 1.627 INCHES MAXIMUM IN |
| Bearing Surface Finish | 125.0 MICROINCHES |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Series | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hardness Rating | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| Material Document and Classification | AMS 5525 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5732 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5737 ASSN STD 3RD MATERIAL RESPONSE OVERALL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 1.125 INCHES IN |
| Nut Height | 0.531 INCHES NOMINAL IN |
| Drilled Hole Diameter | 0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Countersink Angle | 110.0 DEGREES NOMINAL NUT |
| Nut Style | HEXAGON |
| Thread Class | 3B |
| Thread Quantity Per Inch | 12 |
| Material | IRON ALLOY 660 OVERALL |
| Bearing Surface Type | CHAMFERED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-N-836 | 4/1 Identification reference U.S. Government activity |
| NAS509-18C | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-01-450-3675 is a Nut,plain,hexagon, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-450-3675: Width Across Flats: 1.605 INCHES MINIMUM AND 1.627 INCHES MAXIMUM IN; Bearing Surface Finish: 125.0 MICROINCHES; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF). 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.