The Nut,plain,hexagon, cataloged under National Stock Number 5310-01-406-9124, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-406-9124 |
| Item Name | Nut,plain,hexagon |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Width Across Flats | 2.843 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN |
| Bearing Surface Finish | 250.0 MICROINCHES |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Series | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Configuration Style | CONFIGURATION B |
| Material Document and Classification | AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 2.250 INCHES IN |
| Nut Height | 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN |
| Drilled Hole Diameter | 0.070 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Countersink Angle | 110.0 DEGREES NOMINAL NUT |
| Nut Style | HEXAGON |
| Thread Class | 3B |
| Thread Quantity Per Inch | 12 |
| Material | IRON ALLOY 660 OVERALL |
| Bearing Surface Type | CHAMFERED OR WASHER FACED |
| Hole Type and Quantity | 3 DRILLED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1423C36 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-01-406-9124 is a Nut,plain,hexagon, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-406-9124: Width Across Flats: 2.843 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN; Bearing Surface Finish: 250.0 MICROINCHES; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF). 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.