The Nut,plain,blind Rivet, cataloged under National Stock Number 5310-01-324-4098, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-324-4098 |
| Item Name | Nut,plain,blind Rivet |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Nut Length | 1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Series | UNF |
| Head Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Material Document and Classification | MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| Shank End Type | CLOSED |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.250 INCHES IN |
| Nut Diameter | 0.328 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Nut Style | BLIND RIVET W/SMOOTH ROUND SHANK |
| Thread Class | 3B |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 4037 OR STEEL COMP 8740 OVERALL |
| Head Diameter | 0.529 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| GN512B4-391S | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
| CH2528B391BU | 3/9 Design control — primary reference Bfgoodrich Co the Aerospace Div Engineered Polymer Products |
NSN 5310-01-324-4098 is a Nut,plain,blind Rivet, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-324-4098: Nut Length: 1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Series: UNF; Head Countersink Angle: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.