PartsTable TECHNICAL DATA SHEET
NSN 5310-01-314-7051Government record, cited

Nut, Plain, Hexagon5310-01-314-7051

NSN 5310-01-314-7051 · NIIN 013147051 · Part number 717500021-002
Fastener Dimensions Inc. · FSC 5310 — Nuts and Washers · FSG 53 — Hardware and Abrasives · CAGE 0SYU2
Government record, cited
NSN 5310-01-314-7051 — this item is cataloged by the U.S. Government under National Stock Number 5310-01-314-7051. Manufacturer of record part number: 717500021-002.
Also searched as  5310-01-314-7051 · 5310013147051 · NIIN 013147051 · 01-314-7051 · FSC 5310 Nuts and Washers · CAGE 0SYU2 · 717500021-002
Nearby stock numbers  ·
Features
  • Nut,plain,hexagon — FSC 5310
  • Width Across Flats: 0.845 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN
  • Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF)
  • Hardness Rating: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
  • Material Document and Classification: AMS 5525 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5732 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5737 ASSN STD 3RD MATERIAL RESPONSE OVERALL
  • Thread Direction: RIGHT-HAND
  • Nominal Thread Size: 0.5625 INCHES IN
  • Nut Height: 0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
Identification
  • NSN: 5310-01-314-7051
  • NIIN: 013147051
  • FSC: 5310 — Nuts and Washers
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 717500021-002
  • Manufacturer: Fastener Dimensions Inc.
General Description

The Nut,plain,hexagon, cataloged under National Stock Number 5310-01-314-7051, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. The manufacturer of record is Fastener Dimensions Inc.. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5310-01-314-7051
Primary Part Number717500021-002
Item NameNut,plain,hexagon
FSC / FSG5310 / 53 — Nuts and Washers
ManufacturerFastener Dimensions Inc.
StatusACTIVE
Width Across Flats0.845 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN
Thread SeriesUNIFIED NATIONAL JOINT FINE (UNJF)
Hardness Rating34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
Material Document and ClassificationAMS 5525 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5732 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5737 ASSN STD 3RD MATERIAL RESPONSE OVERALL
Thread DirectionRIGHT-HAND
Nominal Thread Size0.5625 INCHES IN
Nut Height0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
Surface TreatmentPASSIVATE OVERALL
Nut StyleHEXAGON
Thread Class3B
Thread Quantity Per Inch18
MaterialIRON ALLOY 660 OVERALL
Bearing Surface TypeWASHER FACED
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
717500021-002 PRIMARY Fastener Dimensions Inc. (USA)
Reference documents
ReferenceMeaning
717500021-002 7/2 Vendor item drawing reference
Lockheed Martin Corporation
No interchangeability data on file.
Other items in FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040
5310-00-000-0040 · Item name not on file
5310-00-000-0077
NUT,PLAIN,ROUND
5310-00-000-0079
WASHER,FLAT
5310-00-000-0079
WASHER,FLAT
5310-00-000-1146
5310-00-000-1146 · Item name not on file
5310-00-000-3815
5310-00-000-3815 · Item name not on file
5310-00-000-4532
5310-00-000-4532 · Item name not on file
5310-00-000-4540
5310-00-000-4540 · Item name not on file

Frequently Asked Questions

What is NSN 5310-01-314-7051?

NSN 5310-01-314-7051 is a Nut,plain,hexagon, manufactured by Fastener Dimensions Inc., classified under FSC 5310, Nuts and Washers. Status: active.

What part numbers are listed for NSN 5310-01-314-7051?

NSN 5310-01-314-7051 has 1 manufacturer part number on file: 717500021-002 (Fastener Dimensions Inc.).

What are the specifications of 717500021-002?

Key specifications for 717500021-002: Width Across Flats: 0.845 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN; Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF); Hardness Rating: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM; Material Document and Classification: AMS 5525 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5732 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5737 ASSN STD 3RD MATERIAL RESPONSE OVERALL. 13 specifications are documented in the U.S. Government catalog.

Is NSN 5310-01-314-7051 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com