The Push on Nut, cataloged under National Stock Number 5310-01-283-3607, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 8 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-283-3607 |
| Item Name | Push on Nut |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AMS 5520 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Material Thickness | 0.024 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN |
| Nut Diameter | 0.361 INCHES MINIMUM AND 0.371 INCHES MAXIMUM IN |
| Mating Member Diameter Accommodated | 0.121 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Nut Style | PUSH ON |
| Material | STEEL COMP 632 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 5115-12HSTB | 3/9 Design control — primary reference Truarc Company Llc Dba Waldes Truarc |
| 11462536 | 7/2 Vendor item drawing reference Us Army Aviation and Missile Command |
| 5115-12-H-ST-0.010 | C/1 Advisory reference — outside the item-of-supply concept Rotor Clip Company, Inc. |
| 5115-12-H-ST-0.010 | 5/9 Secondary reference Truarc Company Llc Dba Waldes Truarc |
NSN 5310-01-283-3607 is a Push on Nut, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-283-3607: Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Material Document and Classification: AMS 5520 ASSN STD SINGLE MATERIAL RESPONSE OVERALL; Material Thickness: 0.024 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN; Nut Diameter: 0.361 INCHES MINIMUM AND 0.371 INCHES MAXIMUM IN. 8 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.