The Nut,plain,round, cataloged under National Stock Number 5310-01-202-9392, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-202-9392 |
| Item Name | Nut,plain,round |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Surface Treatment Document and Classification | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OR QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Flange Thickness | 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN |
| Thread Series | UNS |
| Material Document and Classification | ASTM 582,COND A,COLD FINISHED ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Drive Point Width | 0.060 INCHES NOMINAL IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Nut Diameter | 0.560 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN |
| Drive Point Depth | 0.060 INCHES NOMINAL IN |
| Undercut Thickness | 0.071 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN |
| Nut Thickness | 0.331 INCHES NOMINAL IN |
| Small End Diameter | 0.290 INCHES MINIMUM AND 0.294 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Drive Point Quantity | 2 |
| Thread Class | 2B |
| Thread Quantity Per Inch | 80 |
| Material | STEEL COMP 303SE OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 3246439 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-01-202-9392 is a Nut,plain,round, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-202-9392: Surface Treatment Document and Classification: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OR QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Flange Thickness: 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN; Thread Series: UNS; Material Document and Classification: ASTM 582,COND A,COLD FINISHED ASSN STD SINGLE MATERIAL RESPONSE OVERALL. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.