The Nut,plain,hexagon, cataloged under National Stock Number 5310-01-198-3483, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-198-3483 |
| Item Name | Nut,plain,hexagon |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Width Across Flats | 0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN |
| Bearing Surface Finish | 125.0 MICROINCHES |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Series | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Configuration Style | CONFIGURATION B |
| Material Document and Classification | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Thread Direction | LEFT-HAND |
| Nominal Thread Size | 0.4375 INCHES IN |
| Specification/standard Data | 80205-NAS1423 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Nut Height | 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN |
| Drilled Hole Diameter | 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Countersink Angle | 109.0 DEGREES MINIMUM AND 111.0 DEGREES MAXIMUM BOTH ENDS |
| Nut Style | HEXAGON |
| Thread Class | 3B |
| Thread Quantity Per Inch | 20 |
| Material | IRON ALLOY 660 OVERALL |
| Bearing Surface Type | CHAMFERED |
| Hole Type and Quantity | 3 DRILLED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1423C7LH | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-01-198-3483 is a Nut,plain,hexagon, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-198-3483: Width Across Flats: 0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN; Bearing Surface Finish: 125.0 MICROINCHES; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF). 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.