The Nut,plain,hexagon, cataloged under National Stock Number 5310-01-194-7064, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-194-7064 |
| Item Name | Nut,plain,hexagon |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Width Across Flats | 0.684 INCHES MINIMUM AND 0.691 INCHES MAXIMUM IN |
| Thread Series | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Configuration Style | CONFIGURATION B |
| Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.438 INCHES IN |
| Specification/standard Data | 81205-BACN10DR MANUFACTURERS STANDARD |
| Nut Height | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN |
| Drilled Hole Diameter | 0.036 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN |
| Countersink Angle | 90.0 DEGREES NOMINAL NUT |
| Nut Style | HEXAGON |
| Thread Class | 3B |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP 304 OVERALL |
| Bearing Surface Type | CHAMFERED |
| Hole Type and Quantity | 2 DRILLED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| BACN10DR4J | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-01-194-7064 is a Nut,plain,hexagon, classified under FSC 5310, Nuts and Washers. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5310-01-669-4818. Verify interchangeability with system specifications before substitution.
Key specifications for 5310-01-194-7064: Width Across Flats: 0.684 INCHES MINIMUM AND 0.691 INCHES MAXIMUM IN; Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF); Hole Configuration Style: CONFIGURATION B; Material Document and Classification: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.