The Washer,flat, cataloged under National Stock Number 5310-01-176-0910, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-176-0910 |
| Item Name | Washer,flat |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES BOTTOM |
| Surface Finish | 63.0 MICROINCHES TOP |
| Overall Diameter | 1.125 INCHES MINIMUM AND 1.126 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-C-15726 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Cross-Sectional Shape Style | RECTANGULAR |
| Peripheral Shape Style | ROUND |
| Material | COPPER ALLOY 715 OVERALL |
| Center Hole Shape Style | ROUND |
| Hole Diameter | 0.531 INCHES NOMINAL IN |
| Thickness | 0.044 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2641-809-40 ITEM 75 | 3/2 Design control — primary reference U.S. Government activity |
| 845-4687566 ITEM 12CP | C/1 Advisory reference — outside the item-of-supply concept Naval Inventory Control Point Mechanicsburg |
NSN 5310-01-176-0910 is a Washer,flat, classified under FSC 5310, Nuts and Washers. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5310-01-633-8756. Verify interchangeability with system specifications before substitution.
Key specifications for 5310-01-176-0910: Surface Finish: 63.0 MICROINCHES BOTTOM; Surface Finish: 63.0 MICROINCHES TOP; Overall Diameter: 1.125 INCHES MINIMUM AND 1.126 INCHES MAXIMUM IN; Material Document and Classification: MIL-C-15726 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. 10 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.