The Nut,stamped, cataloged under National Stock Number 5310-01-148-3698, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 9 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-148-3698 |
| Item Name | Nut,stamped |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Width Across Flats | 10.77 MILLIMETERS MINIMUM AND 11.00 MILLIMETERS MAXIMUM MM |
| Surface Treatment Document and Classification | G-4342-M,CODE 30MU40,FSCM 11862 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Nut Diameter | 23.75 MILLIMETERS MINIMUM AND 24.00 MILLIMETERS MAXIMUM MM |
| Gripping Notch Quantity | 2 |
| Mating Member Diameter Accommodated | 6.3 MILLIMETERS NOMINAL MM |
| Nut Height | 7.89 MILLIMETERS MINIMUM AND 8.39 MILLIMETERS MAXIMUM MM |
| Surface Treatment | ZINC OVERALL |
| Nut Style | STAMPED |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 11501899 | 3/9 Design control — primary reference General Motors Corp |
| 11501899 | 5/9 Secondary reference General Motors Corp Chevrolet Motor Div Special Products Dept |
| 11501899 | C/1 Advisory reference — outside the item-of-supply concept General Motors Llc Dba General Motors Llc |
| 1105865 | 5/9 Secondary reference Southwest Machine & Plastic Co Inc |
| 1501899 | 5/9 Secondary reference General Motors Corp |
NSN 5310-01-148-3698 is a Nut,stamped, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-148-3698: Width Across Flats: 10.77 MILLIMETERS MINIMUM AND 11.00 MILLIMETERS MAXIMUM MM; Surface Treatment Document and Classification: G-4342-M,CODE 30MU40,FSCM 11862 MFR REF SINGLE TREATMENT RESPONSE OVERALL; Nut Diameter: 23.75 MILLIMETERS MINIMUM AND 24.00 MILLIMETERS MAXIMUM MM; Gripping Notch Quantity: 2. 9 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.