The Push on Nut, cataloged under National Stock Number 5310-01-134-5776, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. The manufacturer of record is Rotor Clip Company, Inc.. Government technical data includes 7 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-134-5776 |
| Primary Part Number | 5115-37-H-ST |
| Item Name | Push on Nut |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Manufacturer | Rotor Clip Company, Inc. |
| Status | ACTIVE |
| Material Document and Classification | AISI ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5520 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Material Thickness | 0.009 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN |
| Nut Diameter | 0.640 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN |
| Mating Member Diameter Accommodated | 0.371 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN |
| Surface Treatment | OXIDE OVERALL |
| Nut Style | PUSH ON |
| Material | STEEL COMP 632 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 5115-37-H-ST PRIMARY | Rotor Clip Company, Inc. (USA) |
| Reference | Meaning |
|---|---|
| 5115-37-H-ST | 3/9 Design control — primary reference Truarc Company Llc Dba Waldes Truarc |
| 5115-37-H-OF | 5/9 Secondary reference Truarc Company Llc Dba Waldes Truarc |
NSN 5310-01-134-5776 is a Push on Nut, manufactured by Rotor Clip Company, Inc., classified under FSC 5310, Nuts and Washers. Status: active.
NSN 5310-01-134-5776 has 1 manufacturer part number on file: 5115-37-H-ST (Rotor Clip Company, Inc.).
Key specifications for 5115-37-H-ST: Material Document and Classification: AISI ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5520 ASSN STD SINGLE MATERIAL RESPONSE OVERALL; Material Thickness: 0.009 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN; Nut Diameter: 0.640 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN; Mating Member Diameter Accommodated: 0.371 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN. 7 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.