The Nut,sleeve, cataloged under National Stock Number 5310-01-117-7772, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-117-7772 |
| Item Name | Nut,sleeve |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Flange Width Across Flats | 0.625 INCHES NOMINAL IN |
| Nut Length | 0.358 INCHES MINIMUM AND 0.362 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Flange Thickness | 0.045 INCHES NOMINAL IN |
| Thread Series | UNF |
| Material Document and Classification | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Nut Diameter | 0.376 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN |
| Cross-Sectional Shape | HEXAGONAL FLANGE |
| Cross-Sectional Shape | ROUND BOSS |
| Surface Treatment | PASSIVATE OVERALL |
| Countersink Angle | 120.0 DEGREES NOMINAL BOSS |
| Nut Style | SLEEVE |
| Thread Class | 3B |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 630 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 10109315 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
| 261037 | 3/2 Design control — primary reference U.S. Government activity |
| 261037 | 5/9 Secondary reference Kidde-Fenwal, Llc |
NSN 5310-01-117-7772 is a Nut,sleeve, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-117-7772: Flange Width Across Flats: 0.625 INCHES NOMINAL IN; Nut Length: 0.358 INCHES MINIMUM AND 0.362 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Flange Thickness: 0.045 INCHES NOMINAL IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.