PartsTable TECHNICAL DATA SHEET
NSN 5310-01-097-5849Government record, cited

Washer, Flat5310-01-097-5849

NSN 5310-01-097-5849 · NIIN 010975849
FSC 5310 — Nuts and Washers · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5310-01-097-5849 · 5310010975849 · NIIN 010975849 · 01-097-5849 · FSC 5310 Nuts and Washers · 522-4675675 ITEM 6 · 87643-6903 ITEM 6
Nearby stock numbers  ·
Features
  • Washer,flat — FSC 5310
  • Surface Finish: 63.0 MICROINCHES BOTTOM
  • Surface Finish: 63.0 MICROINCHES INNER
  • Surface Finish: 63.0 MICROINCHES TOP
  • Outside Left Corner Chamfer Angle: 45.0 DEGREES NOMINAL
  • Overall Diameter: 1.625 INCHES NOMINAL IN
  • Inside Right Corner Chamfer Angle: 45.0 DEGREES NOMINAL
  • Material Document and Classification: QQ-S-741 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5310-01-097-5849
  • NIIN: 010975849
  • FSC: 5310 — Nuts and Washers
  • FSG: 53 — Hardware and Abrasives
General Description

The Washer,flat, cataloged under National Stock Number 5310-01-097-5849, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5310-01-097-5849
Item NameWasher,flat
FSC / FSG5310 / 53 — Nuts and Washers
StatusACTIVE
Surface Finish63.0 MICROINCHES BOTTOM
Surface Finish63.0 MICROINCHES INNER
Surface Finish63.0 MICROINCHES TOP
Outside Left Corner Chamfer Angle45.0 DEGREES NOMINAL
Overall Diameter1.625 INCHES NOMINAL IN
Inside Right Corner Chamfer Angle45.0 DEGREES NOMINAL
Material Document and ClassificationQQ-S-741 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
Cross-Sectional Shape StyleRECTANGULAR
Inside Left Corner Chamfer Angle45.0 DEGREES NOMINAL
Outside Right Corner Chamfer Angle45.0 DEGREES NOMINAL
Peripheral Shape StyleROUND
MaterialSTEEL OVERALL
Center Hole Shape StyleROUND
Hole Diameter1.000 INCHES MINIMUM IN
Thickness0.260 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
522-4675675 ITEM 6 5/2 Secondary reference
U.S. Government activity
87643-6903 ITEM 6 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040
5310-00-000-0040 · Item name not on file
5310-00-000-0077
NUT,PLAIN,ROUND
5310-00-000-0079
WASHER,FLAT
5310-00-000-0079
WASHER,FLAT
5310-00-000-1146
5310-00-000-1146 · Item name not on file
5310-00-000-3815
5310-00-000-3815 · Item name not on file
5310-00-000-4532
5310-00-000-4532 · Item name not on file
5310-00-000-4540
5310-00-000-4540 · Item name not on file

Frequently Asked Questions

What is NSN 5310-01-097-5849?

NSN 5310-01-097-5849 is a Washer,flat, classified under FSC 5310, Nuts and Washers. Status: active.

What are the specifications of 5310-01-097-5849?

Key specifications for 5310-01-097-5849: Surface Finish: 63.0 MICROINCHES BOTTOM; Surface Finish: 63.0 MICROINCHES INNER; Surface Finish: 63.0 MICROINCHES TOP; Outside Left Corner Chamfer Angle: 45.0 DEGREES NOMINAL. 15 specifications are documented in the U.S. Government catalog.

Is NSN 5310-01-097-5849 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com