The Washer,recessed, cataloged under National Stock Number 5310-01-092-1257, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-092-1257 |
| Item Name | Washer,recessed |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Top Recess Diameter | 0.775 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Bottom Recess Diameter | 0.775 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN |
| Hardness Rating | 38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM |
| Top Recess Angle | 90.0 DEGREES NOMINAL |
| Style Designator | RECESSED BOTH SIDES |
| Material Document and Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Outside Diameter | 1.256 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN |
| Material Thickness | 0.212 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN |
| Bottom Recess Angle | 90.0 DEGREES NOMINAL |
| Surface Treatment | CADMIUM OVERALL |
| Material | STEEL COMP 4130 OVERALL |
| Hole Diameter | 0.627 INCHES MINIMUM AND 0.631 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS14155-10 | 5/9 Secondary reference U.S. Government activity |
| MS14155-10 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-01-092-1257 is a Washer,recessed, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-092-1257: Top Recess Diameter: 0.775 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Bottom Recess Diameter: 0.775 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN; Hardness Rating: 38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.