The Washer,recessed, cataloged under National Stock Number 5310-01-087-0986, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-087-0986 |
| Item Name | Washer,recessed |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES BOTTOM |
| Surface Finish | 63.0 MICROINCHES TOP |
| Top Recess Diameter | 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Bottom Recess Diameter | 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Hardness Rating | 50.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM |
| Top Recess Angle | 90.0 DEGREES NOMINAL |
| Style Designator | RECESSED BOTH SIDES |
| Material Document and Classification | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6437 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Outside Diameter | 0.415 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN |
| Material Thickness | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN |
| Bottom Recess Angle | 90.0 DEGREES NOMINAL |
| Surface Treatment | NICKEL AND CADMIUM OVERALL |
| Material | STEEL COMP H11 OVERALL |
| Hole Diameter | 0.195 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS9482-09 | 2/2 Government specification standardization U.S. Government activity |
NSN 5310-01-087-0986 is a Washer,recessed, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-087-0986: Surface Finish: 63.0 MICROINCHES BOTTOM; Surface Finish: 63.0 MICROINCHES TOP; Top Recess Diameter: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.