PartsTable TECHNICAL DATA SHEET
NSN 5310-01-087-0976Government record, cited

Nut, Self-Locking, Castellated, Hex5310-01-087-0976

NSN 5310-01-087-0976 · NIIN 010870976 · Part number 78847-1018
Sps Technologies, Llc Dba PB Fasteners · FSC 5310 — Nuts and Washers · FSG 53 — Hardware and Abrasives · CAGE 56878
Government record, cited
NSN 5310-01-087-0976 — this item is cataloged by the U.S. Government under National Stock Number 5310-01-087-0976. Manufacturer of record part number: 78847-1018.
Also searched as  5310-01-087-0976 · 5310010870976 · NIIN 010870976 · 01-087-0976 · FSC 5310 Nuts and Washers · CAGE 56878 · 78847-1018 · 209-010-504-001 · 209-010-504-1 · E12429-10
Nearby stock numbers  ·
Features
  • Nut,self-Locking,castellated,hex — FSC 5310
  • Width Across Flats: 0.743 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF)
  • Hardness Rating: 38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
  • Material Document and Classification: AMS6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
  • Thread Direction: RIGHT-HAND
  • Nominal Thread Size: 0.625 INCHES IN
Identification
  • NSN: 5310-01-087-0976
  • NIIN: 010870976
  • FSC: 5310 — Nuts and Washers
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 78847-1018
  • Manufacturer: Sps Technologies, Llc Dba PB Fasteners
General Description

The Nut,self-Locking,castellated,hex, cataloged under National Stock Number 5310-01-087-0976, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba PB Fasteners. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5310-01-087-0976
Primary Part Number78847-1018
Item NameNut,self-Locking,castellated,hex
FSC / FSG5310 / 53 — Nuts and Washers
ManufacturerSps Technologies, Llc Dba PB Fasteners
StatusACTIVE
Width Across Flats0.743 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread SeriesUNIFIED NATIONAL JOINT FINE (UNJF)
Hardness Rating38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
Material Document and ClassificationAMS6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Thread DirectionRIGHT-HAND
Nominal Thread Size0.625 INCHES IN
Locking FeaturePREVAILING TORQUE ALL METAL DESIGN
Nut Height0.703 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN
Surface TreatmentCADMIUM OVERALL
Countersink Angle44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM OVERALL
Nut StyleCASTELLATED, HEXAGON
Thread Class2B
Test Data Document81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch18
MaterialSTEEL OVERALL
Bearing Surface TypeFLAT
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeF
Cross-Reference Index
Part NumberManufacturer
78847-1018 Sps Technologies, Llc Dba PB Fasteners (USA)
Reference documents
ReferenceMeaning
209-010-504-001 5/2 Secondary reference
U.S. Government activity
209-010-504-1 1/2 Source control — Government-approved source
U.S. Government activity
78847-1018 3/2 Design control — primary reference
U.S. Government activity
E12429-10 5/9 Secondary reference
Amerace Corp Esna Div
No interchangeability data on file.
Other items in FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040
5310-00-000-0040 · Item name not on file
5310-00-000-0077
NUT,PLAIN,ROUND
5310-00-000-0079
WASHER,FLAT
5310-00-000-0079
WASHER,FLAT
5310-00-000-1146
5310-00-000-1146 · Item name not on file
5310-00-000-3815
5310-00-000-3815 · Item name not on file
5310-00-000-4532
5310-00-000-4532 · Item name not on file
5310-00-000-4540
5310-00-000-4540 · Item name not on file

Frequently Asked Questions

What is NSN 5310-01-087-0976?

NSN 5310-01-087-0976 is a Nut,self-Locking,castellated,hex, manufactured by Sps Technologies, Llc Dba PB Fasteners, classified under FSC 5310, Nuts and Washers. Status: active.

What part numbers are listed for NSN 5310-01-087-0976?

NSN 5310-01-087-0976 has 1 manufacturer part number on file: 78847-1018 (Sps Technologies, Llc Dba PB Fasteners).

What are the specifications of 78847-1018?

Key specifications for 78847-1018: Width Across Flats: 0.743 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF); Hardness Rating: 38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5310-01-087-0976 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com