The Washer,recessed, cataloged under National Stock Number 5310-01-070-2114, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-070-2114 |
| Item Name | Washer,recessed |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES BOTTOM |
| Surface Finish | 63.0 MICROINCHES TOP |
| Top Recess Diameter | 0.714 INCHES MINIMUM AND 0.733 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-8837,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Bottom Recess Diameter | 0.714 INCHES MINIMUM AND 0.733 INCHES MAXIMUM IN |
| Top Recess Angle | 89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM |
| Style Designator | RECESSED BOTH SIDES |
| Material Document and Classification | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Outside Diameter | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN |
| Material Thickness | 0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN |
| Bottom Recess Angle | 89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM |
| Specification/standard Data | 97499-140-007 MANUFACTURERS STANDARD |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 240000 POUNDS PER SQUARE INCH LBS |
| Material | STEEL COMP H11 OVERALL |
| Hole Diameter | 0.624 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 140-007-40-32D4 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-01-070-2114 is a Washer,recessed, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-070-2114: Surface Finish: 63.0 MICROINCHES BOTTOM; Surface Finish: 63.0 MICROINCHES TOP; Top Recess Diameter: 0.714 INCHES MINIMUM AND 0.733 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-8837,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.