The Washer,recessed, cataloged under National Stock Number 5310-01-064-3626, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-064-3626 |
| Primary Part Number | GW10F-7A |
| Item Name | Washer,recessed |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Manufacturer | Northrop Grumman Systems Corporation |
| Status | ACTIVE |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Hardness Rating | 33.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM |
| Style Designator | RECESSED |
| Outside Diameter | 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN |
| Material Thickness | 0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN |
| Recess Diameter | 0.498 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 150000 POUNDS PER SQUARE INCH LBS |
| Material | STEEL COMP 4130 OVERALL |
| Hole Diameter | 0.438 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN |
| Recess Angle | 90.0 DEGREES NOMINAL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| GW10F-7A PRIMARY | Northrop Grumman Systems Corporation (USA) |
NSN 5310-01-064-3626 is a Washer,recessed, manufactured by Northrop Grumman Systems Corporation, classified under FSC 5310, Nuts and Washers. Status: active.
NSN 5310-01-064-3626 has 1 manufacturer part number on file: GW10F-7A (Northrop Grumman Systems Corporation).
Key specifications for GW10F-7A: Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Hardness Rating: 33.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM; Style Designator: RECESSED; Outside Diameter: 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.