The Nut,plain,blind Rivet, cataloged under National Stock Number 5310-01-059-3599, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-059-3599 |
| Item Name | Nut,plain,blind Rivet |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Nut Length | 0.510 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Series | UNIFIED NATIONAL COARSE (UNC) |
| Head Countersink Angle | 99.00 DEGREES MINIMUM AND 101.00 DEGREES MAXIMUM |
| Shank End Type | CLOSED |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.112 INCHES IN |
| Nut Diameter | 0.151 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Nut Style | BLIND RIVET W/SMOOTH ROUND SHANK |
| Thread Class | 3B |
| Thread Quantity Per Inch | 40 |
| Material | STEEL COMP 4037 OVERALL |
| Head Diameter | 0.263 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CH4B81 | 5/9 Secondary reference Bfgoodrich Co the Aerospace Div Engineered Polymer Products |
| GN512B04-081 | 5/9 Secondary reference Bfgoodrich Co the Rivnuts Div |
| NAS1330H04B81 | 3/2 Design control — primary reference U.S. Government activity |
| GN512B04-081 | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
NSN 5310-01-059-3599 is a Nut,plain,blind Rivet, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-059-3599: Nut Length: 0.510 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Series: UNIFIED NATIONAL COARSE (UNC); Head Countersink Angle: 99.00 DEGREES MINIMUM AND 101.00 DEGREES MAXIMUM. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.