PartsTable TECHNICAL DATA SHEET
NSN 5310-01-056-4224Government record, cited

Nut, Sleeve5310-01-056-4224

NSN 5310-01-056-4224 · NIIN 010564224 · Part number 2006013-1
Goodrich Corporation · FSC 5310 — Nuts and Washers · FSG 53 — Hardware and Abrasives · CAGE 6K4C8
Government record, cited
NSN 5310-01-056-4224 — this item is cataloged by the U.S. Government under National Stock Number 5310-01-056-4224. Manufacturer of record part number: 2006013-1.
Also searched as  5310-01-056-4224 · 5310010564224 · NIIN 010564224 · 01-056-4224 · FSC 5310 Nuts and Washers · CAGE 6K4C8 · 2006013-1 · 2006013
Nearby stock numbers  ·
Features
  • Nut,sleeve — FSC 5310
  • Flange Width Across Flats: 2.470 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
  • Nut Length: 0.560 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: QQ-P-416,TY II,CL 2 FED SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 2ND TREATMENT RESPONSE OR MIL-C-83286 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
  • Flange Thickness: 0.190 INCHES NOMINAL IN
  • Thread Series: UNIFIED NATIONAL JOINT (UNJ)
  • Material Document and Classification: MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
  • Thread Direction: RIGHT-HAND
Identification
  • NSN: 5310-01-056-4224
  • NIIN: 010564224
  • FSC: 5310 — Nuts and Washers
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 2006013-1
  • Manufacturer: Goodrich Corporation
General Description

The Nut,sleeve, cataloged under National Stock Number 5310-01-056-4224, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. The manufacturer of record is Goodrich Corporation. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5310-01-056-4224
Primary Part Number2006013-1
Item NameNut,sleeve
FSC / FSG5310 / 53 — Nuts and Washers
ManufacturerGoodrich Corporation
StatusACTIVE
Flange Width Across Flats2.470 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
Nut Length0.560 INCHES NOMINAL IN
Surface Treatment Document and ClassificationQQ-P-416,TY II,CL 2 FED SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 2ND TREATMENT RESPONSE OR MIL-C-83286 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Flange Thickness0.190 INCHES NOMINAL IN
Thread SeriesUNIFIED NATIONAL JOINT (UNJ)
Material Document and ClassificationMIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
Thread DirectionRIGHT-HAND
Nominal Thread Size2.000 INCHES IN
Nut Diameter2.300 INCHES NOMINAL IN
Cross-Sectional ShapeHEXAGONAL FLANGE
Cross-Sectional ShapeROUND NUT
Surface TreatmentCADMIUM AND PAINT OVERALL
Nut StyleSLEEVE
Thread Class3B
Thread Quantity Per Inch16
MaterialSTEEL COMP 4130 OR STEEL COMP 4140 OVERALL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5935-01-360-869196504-9S POSSIBLE MATCH
CONNECTOR BODY,PLUG,ELECTRICAL
Possible match (shared part number)Amphenol Optimize Manufacturing Co. Div Amphenol Aerospace/matrix
4920-01-565-790920-06013 POSSIBLE MATCH
POWER SUPPLY,JWS60,
Possible match (shared part number)Tdk-Lambda Americas Inc. Div Tdk-Lambda Americas-Low Power
Cross-Reference Index
Part NumberManufacturer
2006013-1 PRIMARY Goodrich Corporation (USA)
2006013-1 Cm Manufacturing Inc Dba Cm Manufacturing Inc (USA)
Reference documents
ReferenceMeaning
2006013 5/9 Secondary reference
Cm Manufacturing Inc Dba Cm Manufacturing Inc
2006013-1 3/9 Design control — primary reference
Goodrich Corp Dba Goodrich Corp
Related Parts
5935-01-360-8691POSSIBLE MATCH
CONNECTOR BODY,PLUG,ELECTRICAL
96504-9S
4920-01-565-7909POSSIBLE MATCH
POWER SUPPLY,JWS60,
20-06013

Frequently Asked Questions

What is NSN 5310-01-056-4224?

NSN 5310-01-056-4224 is a Nut,sleeve, manufactured by Goodrich Corporation, classified under FSC 5310, Nuts and Washers. Status: active.

What part numbers are listed for NSN 5310-01-056-4224?

NSN 5310-01-056-4224 has 2 manufacturer part numbers on file: 2006013-1 (Goodrich Corporation), 2006013-1 (Cm Manufacturing Inc Dba Cm Manufacturing Inc).

What NSN replaces 5310-01-056-4224?

2 possible matches (shared part number, not a government interchangeability claim): 5935-01-360-8691, 4920-01-565-7909. Verify interchangeability with system specifications before substitution.

What are the specifications of 2006013-1?

Key specifications for 2006013-1: Flange Width Across Flats: 2.470 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN; Nut Length: 0.560 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-416,TY II,CL 2 FED SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 2ND TREATMENT RESPONSE OR MIL-C-83286 MIL SPEC 2ND TREATMENT RESPONSE OVERALL; Flange Thickness: 0.190 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.

Is NSN 5310-01-056-4224 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com