The Nut,sleeve, cataloged under National Stock Number 5310-01-053-7005, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-053-7005 |
| Item Name | Nut,sleeve |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Flange Diameter | 0.219 INCHES NOMINAL IN |
| Nut Length | 0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | ASTM A165 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Flange Thickness | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN |
| Thread Series | UNIFIED NATIONAL COARSE (UNC) |
| Thread Length | 0.188 INCHES MINIMUM OVERALL IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.112 INCHES IN |
| Nut Diameter | 0.141 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN |
| Cross-Sectional Shape | ROUND NUT |
| Surface Treatment | CADMIUM OVERALL |
| Countersink Angle | 90.0 DEGREES NOMINAL NUT |
| Nut Style | SLEEVE |
| Thread Class | 2B |
| Thread Quantity Per Inch | 40 |
| Material | COPPER ALLOY OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 441-0671-03 | C/1 Advisory reference — outside the item-of-supply concept Zf Industrieantriebe Witten Gmbh |
| 210-0599-00 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-01-053-7005 is a Nut,sleeve, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-053-7005: Flange Diameter: 0.219 INCHES NOMINAL IN; Nut Length: 0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN; Surface Treatment Document and Classification: ASTM A165 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Flange Thickness: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.