The Nut,sleeve, cataloged under National Stock Number 5310-01-010-7266, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-010-7266 |
| Primary Part Number | 3005M76P1 |
| Item Name | Nut,sleeve |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| Flange Width Across Flats | 0.703 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN |
| Nut Length | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Flange Thickness | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN |
| Thread Series | UNEF |
| Material Document and Classification | AMS 5646 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.375 INCHES IN |
| Nut Diameter | 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| Cross-Sectional Shape | ROUND W/WRENCH FLATS FLANGE |
| Countersink Angle | 105.0 DEGREES MINIMUM AND 115.0 DEGREES MAXIMUM NUT |
| Nut Style | SLEEVE |
| Thread Class | 2B |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 347 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 3005M76P1 PRIMARY | General Electric Company (USA) |
NSN 5310-01-010-7266 is a Nut,sleeve, manufactured by General Electric Company, classified under FSC 5310, Nuts and Washers. Status: active.
NSN 5310-01-010-7266 has 1 manufacturer part number on file: 3005M76P1 (General Electric Company).
Key specifications for 3005M76P1: Flange Width Across Flats: 0.703 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN; Nut Length: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Flange Thickness: 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN; Thread Series: UNEF. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.