The Nut,self-Locking,plate, cataloged under National Stock Number 5310-01-009-9788, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-01-009-9788 |
| Item Name | Nut,self-Locking,plate |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Plate Thickness | 0.055 INCHES MAXIMUM IN |
| Nut Length | 0.822 INCHES MAXIMUM IN |
| Thread Series | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Plate Width | 0.414 INCHES MAXIMUM IN |
| Mounting Hole Arrangement Style | 2 HOLES |
| Mounting Hole Countersink Angle | 100.0 DEGREES NOMINAL |
| Mounting Hole Diameter | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN |
| Mounting Provision Location | OPPOSITE NUT PROJECTION SIDE |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.250 INCHES IN |
| Distance From Aperture Center to Mounting Hole Center | 0.281 INCHES NOMINAL IN |
| Center to Center Distance Between Mounting Holes Along Length | 0.219 INCHES NOMINAL IN |
| Nut Height | 0.281 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Nut Style | PLATE |
| Thread Class | 3B |
| Thread Quantity Per Inch | 28 |
| Material | STEEL OVERALL |
| Nut Mounting Provision | COUNTERSUNK HOLES OR DIMPLED HOLES |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS696X4K | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-01-009-9788 is a Nut,self-Locking,plate, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-01-009-9788: Plate Thickness: 0.055 INCHES MAXIMUM IN; Nut Length: 0.822 INCHES MAXIMUM IN; Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF); Plate Width: 0.414 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.