Washer, Recessed5310-00-930-6595

NSN 5310-00-930-6595 · NIIN 009306595

FSC 5310 — Nuts and Washers · FSG 53 — Hardware and Abrasives

Government record, cited

Also searched as 5310-00-930-6595 · 5310009306595 · NIIN 009306595 · 00-930-6595 · FSC 5310 Nuts and Washers

Nearby stock numbers ← 5310-00-930-6594 Washer, Spring Tension · 5310-00-930-6597 →

5310-00-930-6595 — Nuts and Washers

Features

Washer,recessed — FSC 5310
Top Recess Diameter: 0.699 INCHES NOMINAL IN
Bottom Recess Diameter: 0.699 INCHES NOMINAL IN
Hardness Rating: 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
Top Recess Angle: 90.0 DEGREES NOMINAL
Style Designator: RECESSED BOTH SIDES
Material Document and Classification: AMS 5612 MFR REF SINGLE MATERIAL RESPONSE OVERALL
Outside Diameter: 0.875 INCHES NOMINAL IN

Identification

NSN: 5310-00-930-6595
NIIN: 009306595
FSC: 5310 — Nuts and Washers
FSG: 53 — Hardware and Abrasives

General Description

The Washer,recessed, cataloged under National Stock Number 5310-00-930-6595, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications

Parameter	Value
NSN	5310-00-930-6595
Item Name	Washer,recessed
FSC / FSG	5310 / 53 — Nuts and Washers
Status	ACTIVE
Top Recess Diameter	0.699 INCHES NOMINAL IN
Bottom Recess Diameter	0.699 INCHES NOMINAL IN
Hardness Rating	27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
Top Recess Angle	90.0 DEGREES NOMINAL
Style Designator	RECESSED BOTH SIDES
Material Document and Classification	AMS 5612 MFR REF SINGLE MATERIAL RESPONSE OVERALL
Outside Diameter	0.875 INCHES NOMINAL IN
Recess Depth	0.070 INCHES NOMINAL IN
Material Thickness	0.180 INCHES NOMINAL IN
Bottom Recess Angle	90.0 DEGREES NOMINAL
Minimum Tensile Strength	125000 POUNDS PER SQUARE INCH LBS
Material	STEEL COMP 410 OVERALL
Hole Diameter	0.514 INCHES MINIMUM AND 0.523 INCHES MAXIMUM IN

Lifecycle & Compliance

Acquisition Status	ACTIVE
DEMIL Code	DEMIL A — No Demilitarization Required
Hazard	No hazard code in the DLA record (HMIC N)
Criticality Code	X

Cross-Reference Index

No manufacturer part numbers on file in the U.S. Government catalog.

Reference documents

Reference	Meaning
12L9093-7	3/2 Design control — primary reference U.S. Government activity

No interchangeability data on file.

Other items in FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040

5310-00-000-0040 · Item name not on file

5310-00-000-0077

NUT,PLAIN,ROUND

5310-00-000-0079

WASHER,FLAT

5310-00-000-0079

WASHER,FLAT

5310-00-000-1146

5310-00-000-1146 · Item name not on file

5310-00-000-3815

5310-00-000-3815 · Item name not on file

5310-00-000-4532

5310-00-000-4532 · Item name not on file

5310-00-000-4540

5310-00-000-4540 · Item name not on file

Frequently Asked Questions

What is NSN 5310-00-930-6595?

NSN 5310-00-930-6595 is a Washer,recessed, classified under FSC 5310, Nuts and Washers. Status: active.

What are the specifications of 5310-00-930-6595?

Key specifications for 5310-00-930-6595: Top Recess Diameter: 0.699 INCHES NOMINAL IN; Bottom Recess Diameter: 0.699 INCHES NOMINAL IN; Hardness Rating: 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM; Top Recess Angle: 90.0 DEGREES NOMINAL. 13 specifications are documented in the U.S. Government catalog.

Is NSN 5310-00-930-6595 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.

PartsTable Design LLC · partstable.com