The Nut,sleeve, cataloged under National Stock Number 5310-00-926-6924, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-926-6924 |
| Item Name | Nut,sleeve |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Flange Width Across Flats | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN |
| Nut Length | 0.155 INCHES NOMINAL IN |
| Flange Thickness | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Thread Series | UNF |
| Hole Configuration Style | CONFIGURATION B |
| Material Document and Classification | AMS 5645 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Nut Diameter | 0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN |
| Counterbore Diameter | 0.194 INCHES MINIMUM AND 0.210 INCHES MAXIMUM NUT IN |
| Cross-Sectional Shape | HEXAGONAL FLANGE |
| Cross-Sectional Shape | ROUND NUT |
| Drilled Hole Diameter | 0.043 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN |
| Countersink Angle | 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM NUT |
| Nut Style | SLEEVE |
| Thread Class | 3B |
| Thread Quantity Per Inch | 32 |
| Material | STEEL OVERALL |
| Hole Type and Quantity | 2 DRILLED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2004T85P01 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-00-926-6924 is a Nut,sleeve, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-00-926-6924: Flange Width Across Flats: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN; Nut Length: 0.155 INCHES NOMINAL IN; Flange Thickness: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Thread Series: UNF. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.