The Washer,recessed, cataloged under National Stock Number 5310-00-903-4861, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-903-4861 |
| Item Name | Washer,recessed |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES ALL SURFACES |
| Top Recess Diameter | 1.141 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-8837,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Bottom Recess Diameter | 1.141 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN |
| Top Recess Angle | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM |
| Style Designator | RECESSED BOTH SIDES |
| Outside Diameter | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN |
| Material Thickness | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| Bottom Recess Angle | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Material | STEEL COMP H11 OVERALL |
| Hole Diameter | 1.131 INCHES MINIMUM AND 1.151 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 140-007-45-44-4 | 5/9 Secondary reference U.S. Government activity |
| 140-007-45-44-4 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-00-903-4861 is a Washer,recessed, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-00-903-4861: Surface Finish: 63.0 MICROINCHES ALL SURFACES; Top Recess Diameter: 1.141 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-8837,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Bottom Recess Diameter: 1.141 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.