The Washer,recessed, cataloged under National Stock Number 5310-00-880-3359, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. The manufacturer of record is Triumph Engine Control Systems Llc. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-880-3359 |
| Primary Part Number | 72419-4 |
| Item Name | Washer,recessed |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Manufacturer | Triumph Engine Control Systems Llc |
| Status | ACTIVE |
| Top Recess Diameter | 0.315 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN |
| Bottom Recess Diameter | 0.315 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN |
| Heat Treatment | AS FABRICATED |
| Hardness Rating | 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM |
| Top Recess Angle | 90.0 DEGREES NOMINAL |
| Style Designator | RECESSED BOTH SIDES |
| Material Document and Classification | AMS5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Outside Diameter | 0.500 INCHES NOMINAL IN |
| Recess Depth | 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN |
| Material Thickness | 0.113 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN |
| Bottom Recess Angle | 90.0 DEGREES NOMINAL |
| Surface Treatment | OXIDE FILM OVERALL |
| Material | STEEL OVERALL |
| Hole Diameter | 0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
NSN 5310-00-880-3359 is a Washer,recessed, manufactured by Triumph Engine Control Systems Llc, classified under FSC 5310, Nuts and Washers. Status: active.
NSN 5310-00-880-3359 has 2 manufacturer part numbers on file: 72419-4 (Goodrich Control Systems Gmbh), 72419-4 (Triumph Engine Control Systems Llc).
Key specifications for 72419-4: Top Recess Diameter: 0.315 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN; Bottom Recess Diameter: 0.315 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN; Heat Treatment: AS FABRICATED; Hardness Rating: 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.