The Nut,plain,hexagon, cataloged under National Stock Number 5310-00-792-4345, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-792-4345 |
| Item Name | Nut,plain,hexagon |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Width Across Flats | 0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN |
| Bearing Surface Finish | 63.0 MICROINCHES |
| Surface Treatment Document and Classification | AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Series | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Precious Material | SILVER |
| Hole Configuration Style | CONFIGURATION A |
| Material Document and Classification | AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 4.000 INCHES IN |
| Nut Height | 0.136 INCHES NOMINAL IN |
| Drilled Hole Diameter | 0.031 INCHES NOMINAL IN |
| Surface Treatment | SILVER OVERALL |
| Countersink Angle | 90.0 DEGREES NOMINAL NUT |
| Nut Style | HEXAGON |
| Thread Class | 3B |
| Thread Quantity Per Inch | 48 |
| Material | IRON ALLOY 660 OVERALL |
| Bearing Surface Type | WASHER FACED |
| Hole Type and Quantity | 2 DRILLED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | F |
| Reference | Meaning |
|---|---|
| MS9360-04 | 2/2 Government specification standardization U.S. Government activity |
| 46546400201 | 5/1 Secondary reference U.S. Government activity |
| 46546400201 | 5/1 Secondary reference U.S. Government activity |
NSN 5310-00-792-4345 is a Nut,plain,hexagon, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-00-792-4345: Width Across Flats: 0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN; Bearing Surface Finish: 63.0 MICROINCHES; Surface Treatment Document and Classification: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF). 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.