The Nut,plain,hexagon, cataloged under National Stock Number 5310-00-659-4619, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-659-4619 |
| Item Name | Nut,plain,hexagon |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Width Across Flats | 0.809 INCHES MINIMUM AND 0.817 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| Thread Series | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Configuration Style | CONFIGURATION B |
| Material Document and Classification | QQ-763 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.562 INCHES IN |
| Nut Height | 0.260 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN |
| Drilled Hole Diameter | 0.036 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Countersink Angle | 90.0 DEGREES NOMINAL BOTH ENDS |
| Nut Style | HEXAGON |
| Thread Class | 3B |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 347 OVERALL |
| Bearing Surface Type | CHAMFERED |
| Hole Type and Quantity | 2 DRILLED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| BACN10DR6C | 3/2 Design control — primary reference U.S. Government activity |
| BACN10DR6C | 5/2 Secondary reference U.S. Government activity |
NSN 5310-00-659-4619 is a Nut,plain,hexagon, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-00-659-4619: Width Across Flats: 0.809 INCHES MINIMUM AND 0.817 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL; Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF); Hole Configuration Style: CONFIGURATION B. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.