PartsTable TECHNICAL DATA SHEET
NSN 5310-00-579-0817Government record, cited

Nut, Plain, Hexagon5310-00-579-0817

NSN 5310-00-579-0817 · NIIN 005790817
FSC 5310 — Nuts and Washers · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5310-00-579-0817 · 5310005790817 · NIIN 005790817 · 00-579-0817 · FSC 5310 Nuts and Washers · 10088024 · NAS509L6 · NAS509-6L · FF-N-836
Nearby stock numbers  ·
Features
  • Nut,plain,hexagon — FSC 5310
  • Width Across Flats: 0.553 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
  • Bearing Surface Finish: 125.0 MICROINCHES
  • Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF)
  • Hardness Rating: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
  • Hole Configuration Style: CONFIGURATION B
  • Material Document and Classification: MIL-S-6758,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5310-00-579-0817
  • NIIN: 005790817
  • FSC: 5310 — Nuts and Washers
  • FSG: 53 — Hardware and Abrasives
General Description

The Nut,plain,hexagon, cataloged under National Stock Number 5310-00-579-0817, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5310-00-579-0817
Item NameNut,plain,hexagon
FSC / FSG5310 / 53 — Nuts and Washers
StatusACTIVE
Width Across Flats0.553 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
Bearing Surface Finish125.0 MICROINCHES
Surface Treatment Document and ClassificationQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread SeriesUNIFIED NATIONAL JOINT FINE (UNJF)
Hardness Rating34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
Hole Configuration StyleCONFIGURATION B
Material Document and ClassificationMIL-S-6758,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
Thread DirectionLEFT-HAND
Nominal Thread Size0.375 INCHES IN
Specification/standard Data80205-NAS509 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Nondefinitive Spec/std Data2 TYPE
Nut Height0.250 INCHES NOMINAL IN
Drilled Hole Diameter0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Countersink Angle110.0 DEGREES NOMINAL BOTH ENDS
Nut StyleHEXAGON
Thread Class3B
Thread Quantity Per Inch24
MaterialSTEEL COMP 4130 OVERALL
Bearing Surface TypeCHAMFERED
Hole Type and Quantity3 DRILLED
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
10088024 6/9 Informative reference only
Nimikkeistokeskus Ncb Finland
NAS509L6 3/2 Design control — primary reference
U.S. Government activity
NAS509-6L C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
FF-N-836 4/1 Identification reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040
5310-00-000-0040 · Item name not on file
5310-00-000-0077
NUT,PLAIN,ROUND
5310-00-000-0079
WASHER,FLAT
5310-00-000-0079
WASHER,FLAT
5310-00-000-1146
5310-00-000-1146 · Item name not on file
5310-00-000-3815
5310-00-000-3815 · Item name not on file
5310-00-000-4532
5310-00-000-4532 · Item name not on file
5310-00-000-4540
5310-00-000-4540 · Item name not on file

Frequently Asked Questions

What is NSN 5310-00-579-0817?

NSN 5310-00-579-0817 is a Nut,plain,hexagon, classified under FSC 5310, Nuts and Washers. Status: active.

What are the specifications of 5310-00-579-0817?

Key specifications for 5310-00-579-0817: Width Across Flats: 0.553 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN; Bearing Surface Finish: 125.0 MICROINCHES; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF). 21 specifications are documented in the U.S. Government catalog.

Is NSN 5310-00-579-0817 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com