The Washer,flat, cataloged under National Stock Number 5310-00-515-8599, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 9 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-515-8599 |
| Item Name | Washer,flat |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Overall Diameter | 2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-16782 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Cross-Sectional Shape Style | RECTANGULAR |
| Surface Treatment | PAINT OVERALL |
| Peripheral Shape Style | ROUND |
| Material | STEEL OVERALL |
| Center Hole Shape Style | ROUND |
| Hole Diameter | 0.562 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN |
| Thickness | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 611526 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
NSN 5310-00-515-8599 is a Washer,flat, classified under FSC 5310, Nuts and Washers. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5342-00-945-0485. Verify interchangeability with system specifications before substitution.
Key specifications for 5310-00-515-8599: Overall Diameter: 2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN; Material Document and Classification: MIL-S-16782 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL; Cross-Sectional Shape Style: RECTANGULAR; Special Features: OUTSIDE EDGE OF ONE SURFACE IS ROUNDED BY A 1/16 INCH RADIUS IN. 9 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.