The Washer,recessed, cataloged under National Stock Number 5310-00-514-4589, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-514-4589 |
| Item Name | Washer,recessed |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES TOP |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Hardness Rating | 40.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM |
| Style Designator | RECESSED |
| Material Document and Classification | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6358 ASSN STD 2ND MATERIAL RESPONSE OR ASTMA193 B7 ASSN STD 3RD MATERIAL RESPONSE OVERALL |
| Outside Diameter | 0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN |
| Material Thickness | 0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN |
| Recess Diameter | 0.552 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Material | STEEL COMP 4130 OR STEEL COMP 8740 OR STEEL OVERALL |
| Hole Diameter | 0.448 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN |
| Recess Angle | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| LS10095-7CV | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-00-514-4589 is a Washer,recessed, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-00-514-4589: Surface Finish: 32.0 MICROINCHES TOP; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Hardness Rating: 40.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM; Style Designator: RECESSED. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.