PartsTable TECHNICAL DATA SHEET
NSN 5310-00-499-3451Government record, cited

Washer, Recessed5310-00-499-3451

NSN 5310-00-499-3451 · NIIN 004993451
FSC 5310 — Nuts and Washers · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5310-00-499-3451 · 5310004993451 · NIIN 004993451 · 00-499-3451 · FSC 5310 Nuts and Washers · 2637507PC3 · 22033-2
Nearby stock numbers  ·
Features
  • Washer,recessed — FSC 5310
  • Surface Finish: 63.0 MICROINCHES BOTTOM
  • Surface Finish: 63.0 MICROINCHES TOP
  • Top Recess Diameter: 0.295 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
  • Bottom Recess Diameter: 0.295 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
  • Heat Treatment: ANNEALED
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM
  • Top Recess Angle: 45.0 DEGREES NOMINAL
Identification
  • NSN: 5310-00-499-3451
  • NIIN: 004993451
  • FSC: 5310 — Nuts and Washers
  • FSG: 53 — Hardware and Abrasives
General Description

The Washer,recessed, cataloged under National Stock Number 5310-00-499-3451, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5310-00-499-3451
Item NameWasher,recessed
FSC / FSG5310 / 53 — Nuts and Washers
StatusACTIVE
Surface Finish63.0 MICROINCHES BOTTOM
Surface Finish63.0 MICROINCHES TOP
Top Recess Diameter0.295 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
Bottom Recess Diameter0.295 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
Heat TreatmentANNEALED
Hardness Rating36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM
Top Recess Angle45.0 DEGREES NOMINAL
Style DesignatorRECESSED BOTH SIDES
Outside Diameter0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
Material Thickness0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
Bottom Recess Angle45.0 DEGREES NOMINAL
MaterialSTEEL COMP 630 OVERALL
Hole Diameter0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 3
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
4820-00-621-3066W20332 POSSIBLE MATCH
COCK,PLUG
Possible match (shared part number)Danfoss Power Solutions II, Llc
4820-01-049-1049 POSSIBLE MATCH
COCK,PLUG
Possible match (shared part number)
6545-01-607-7970TICS.00.10014 POSSIBLE MATCH
REFILL,UTILITY FIRST AID KIT
Possible match (shared part number)Tribalco Llc
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
2637507PC3 3/9 Design control — primary reference
Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier
22033-2 C/1 Advisory reference — outside the item-of-supply concept
Breeze-Eastern Llc
Related Parts
4820-00-621-3066POSSIBLE MATCH
COCK,PLUG
W20332
4820-01-049-1049POSSIBLE MATCH
COCK,PLUG
6545-01-607-7970POSSIBLE MATCH
REFILL,UTILITY FIRST AID KIT
TICS.00.10014

Frequently Asked Questions

What is NSN 5310-00-499-3451?

NSN 5310-00-499-3451 is a Washer,recessed, classified under FSC 5310, Nuts and Washers. Status: active.

What NSN replaces 5310-00-499-3451?

3 possible matches (shared part number, not a government interchangeability claim): 4820-00-621-3066, 4820-01-049-1049, 6545-01-607-7970. Verify interchangeability with system specifications before substitution.

What are the specifications of 5310-00-499-3451?

Key specifications for 5310-00-499-3451: Surface Finish: 63.0 MICROINCHES BOTTOM; Surface Finish: 63.0 MICROINCHES TOP; Top Recess Diameter: 0.295 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN; Bottom Recess Diameter: 0.295 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN. 13 specifications are documented in the U.S. Government catalog.

Is NSN 5310-00-499-3451 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com